Hawke Carbon Fibre Pro Bipod 8-11 Inch - Smooth

The Hawke Carbon Fibre Pro Bipod uses lightweight carbon fibre legs to reduce overall weight while maintaining a strong, supportive construction.

At approximately 290g, the smooth model is around 50g lighter than the equivalent notched version. This makes it particularly appealing to shooters who want to minimise additional equipment weight without sacrificing the convenience of an adjustable rifle support.

The 8–11 inch height range can accommodate prone shooting, benchrest use and other suitable shooting positions, depending on the rifle setup and ground conditions.

Its combination of independent leg adjustment, swivel movement and controlled tilt makes the bipod useful when shooting from surfaces that are not perfectly level.

Unlike the notched Hawke Carbon Fibre Pro Bipod, this model uses smooth compression-sprung legs with twist-lock adjustment.

The smooth design allows each leg to be extended to the required position within its adjustment range without being restricted to preset notches.

To adjust the height, release the twist-lock mechanism, position the leg to the required extension and secure the lock before use.

Because each leg can be adjusted independently, the bipod can be configured to compensate for uneven surfaces or to fine-tune the shooting height.

This configuration is particularly suited to shooters who prefer continuously variable adjustment rather than the fixed increments of a notched bipod.

The Hawke Carbon Fibre Pro Bipod 71002 features an integrated quick-release Picatinny mounting system.

This allows the bipod to be fitted to a suitable Picatinny accessory rail and removed when not required.

Compatible Mounting Systems

• Suitable Picatinny accessory rails
• Rifles fitted with a compatible Picatinny mounting adapter

The bipod does not attach directly to a standard sling swivel stud or an M-LOK slot without a suitable adapter.

For rifles equipped with an M-LOK handguard or a sling swivel stud, an appropriate Picatinny conversion adapter may be required. These adapters are not included with the bipod.

Always check that the mounting rail or adapter is securely fitted and compatible before using the bipod.

The Hawke Carbon Fibre Pro Smooth Bipod offers several adjustment options to accommodate different shooting positions and terrain.

Horizontal Swivel

The horizontal swivel mechanism allows the rifle to move left and right without having to reposition the bipod feet.

40° Tilt Adjustment

The bipod offers up to 40° of tilt adjustment to either side. A resettable locking lever provides control over the tilt mechanism.

180° Leg Positioning

The legs can be positioned forwards or backwards through a 180° range of motion, providing flexibility when deploying, folding or repositioning the bipod.

Together, these adjustments help accommodate uneven ground and changes in shooting position.

The Hawke Carbon Fibre Pro Bipod is supplied with interchangeable rubber and spiked feet, allowing the support to be adapted to different surfaces.

Anti-Slip Rubber Feet

The rubber feet are suitable for firm surfaces such as shooting benches, mats and other solid supports where grip and surface protection are important.

Spiked Feet

The alternative spiked feet can provide additional purchase on softer outdoor surfaces.

Both foot types are included with the bipod. Select the appropriate feet for the shooting surface and avoid using spiked feet where they may cause damage.

The Hawke Carbon Fibre Pro 8–11 Inch Bipod is available in smooth and notched leg configurations. Both feature carbon fibre construction, a quick-release Picatinny mount and adjustable support, but their leg mechanisms differ.

Choose the Smooth Version If:

• You prefer continuously variable height adjustment.
• You want to fine-tune each leg independently.
• You prefer a twist-lock leg mechanism.
• You want the lighter 290g configuration.

Choose the Notched Version If:

• You prefer positive, repeatable height settings.
• You want push-button adjustment.
• You regularly need to match leg heights using fixed increments.

The smooth version offers finer height positioning and lower weight, while the notched version provides repeatable preset adjustment. Both are designed for similar shooting applications.

The Hawke Carbon Fibre Pro Bipod 8–11 Inch Smooth Black is supplied with:

• 1 × Hawke Carbon Fibre Pro Bipod – Smooth (71002)
• Anti-slip rubber feet
• Spiked feet
• Integrated quick-release Picatinny mounting system

Additional rail adapters are not listed as included. Packaging and any printed documentation may vary.

The Hawke Carbon Fibre Pro Bipod is covered by a 2-year Hawke manufacturer warranty against qualifying defects in materials and workmanship, subject to the manufacturer's warranty terms.

Where a qualifying manufacturing defect occurs during the warranty period, Hawke may repair or replace the product in accordance with its warranty policy.

The warranty does not normally cover accidental damage, misuse, unauthorised modification or normal wear and tear.

Proof of purchase may be required when submitting a warranty claim.

For further information, visit Hawke Warranty Information.

Purchases from Bamfords Online also retain any applicable statutory consumer rights.

What height is the Hawke Carbon Fibre Pro Smooth Bipod?

The smooth version offers a nominal adjustable height range of 8–11 inches (20–28cm), suitable for a range of shooting positions depending on the rifle and mounting arrangement.

What is the difference between smooth and notched bipod legs?

Smooth legs allow continuously variable height adjustment using a twist-lock mechanism. Notched legs use preset adjustment increments with push-button locks.

How much does the Hawke 71002 bipod weigh?

The Hawke Carbon Fibre Pro 8–11 Inch Smooth Bipod weighs approximately 290g (10.2oz).

Does the Hawke Carbon Fibre Pro Bipod fit a Picatinny rail?

Yes. The bipod features an integrated quick-release Picatinny mount for attachment to a suitable rail.

Can this bipod be fitted to an M-LOK handguard?

Yes, provided a suitable M-LOK to Picatinny adapter is fitted. The bipod does not mount directly to M-LOK slots.

Will the bipod fit a sling swivel stud?

Not directly. A suitable sling swivel stud to Picatinny adapter would be required.

Does the bipod tilt on uneven ground?

Yes. It provides up to 40° of tilt adjustment to either side, controlled by a resettable locking lever.

Does the bipod swivel horizontally?

Yes. The horizontal swivel mechanism allows left and right movement without repositioning the bipod feet.

Are rubber and spiked feet included?

Yes. Both anti-slip rubber feet and spiked feet are supplied.

Is the Hawke Carbon Fibre Pro Smooth Bipod suitable for prone shooting?

The 8–11 inch height range can be suitable for prone shooting, depending on the rifle configuration, terrain and individual shooting position.

What is the manufacturer part number?

The manufacturer part number for the smooth 8–11 inch model is 71002.

What warranty does the Hawke Carbon Fibre Pro Bipod have?

The bipod is covered by a 2-year Hawke manufacturer warranty against qualifying defects, subject to the manufacturer's terms.