HIKMICRO Lynx LE10 3.0 Thermal Monocular 10mm 256px

The Lynx LE10 3.0 features a 256 × 192 uncooled VOx thermal detector with a 12μm pixel pitch.

The detector contains 49,152 native thermal pixels and is designed to identify differences in infrared radiation emitted by objects and their surroundings.

With a Noise Equivalent Temperature Difference (NETD) below 20mK, the sensor can distinguish relatively small temperature variations under the manufacturer's specified test conditions.

This improved sensitivity helps reveal animal outlines and environmental detail, particularly when the temperature contrast between a subject and its surroundings is limited.

Thermal imaging works without visible light, allowing observation during daylight, at dusk and in complete darkness.

Actual image detail depends on temperature contrast, humidity, weather conditions and observation distance.

The LE10 3.0 uses a 9.7mm objective lens with an F1.0 aperture, designed to provide a wide viewing angle for close-range thermal observation.

The shorter focal length is particularly useful when scanning woodland, hedgerows, paddocks and smaller fields where subjects may appear at relatively short distances.

The lens uses a focus-free design, eliminating the need to adjust an objective focus ring during normal observation.

HIKMICRO specifies a minimum focusing distance of approximately 3.4 metres.

Compared with longer-lens models in the Lynx 3.0 range, the LE10 provides a wider field of view but lower native optical magnification.

HIKMICRO specifies a maximum thermal detection distance of up to 500 metres for the Lynx LE10 3.0.

This manufacturer-stated figure describes the ability to detect a reference thermal target under suitable conditions.

Detection is different from recognition or positive identification. An animal may be visible as a heat signature at a considerable distance without enough detail to identify its species reliably.

The LE10 3.0 is particularly suited to shorter-range observation where its wide field of view can be used to locate subjects quickly.

Actual performance depends on target size, temperature contrast, weather, atmospheric humidity and surrounding terrain.

The LE10 3.0 provides an angular field of view of 18.0° × 13.6°, equivalent to approximately 31.7 × 23.8 metres at a distance of 100 metres.

This wide viewing area makes it easier to scan across a field or woodland clearing without repeatedly moving the monocular.

The device has a base magnification of 1.4× and supports up to 8× digital zoom, providing an overall magnification range of approximately 1.4× to 11.2×.

Digital magnification allows smaller areas of the thermal image to be examined more closely, although increasing zoom does not increase the sensor's native resolution.

The LE10 is therefore best suited to customers prioritising a broad viewing area rather than maximum long-distance magnification.

The HIKMICRO Lynx LE10 3.0 incorporates Image Pro 3.0, the manufacturer's upgraded thermal image-processing technology.

The system is designed to improve the presentation of thermal images by refining contrast, edge definition and perceived detail.

This can help users distinguish subjects from surrounding vegetation, ground features and other background objects.

Image Pro 3.0 operates alongside the 256 × 192 thermal detector and 9.7mm objective lens to provide a more refined viewing experience.

Image processing enhances the displayed image but does not increase the physical resolution of the thermal sensor.

The LE10 3.0 features HIKMICRO's Shutterless Image System, commonly referred to as HSIS.

Conventional thermal imaging devices may periodically interrupt the viewing image while performing mechanical shutter calibration.

HSIS is designed to maintain a more continuous thermal image without these regular shutter interruptions.

This is particularly useful when scanning moving subjects or observing wildlife where maintaining a consistent view is important.

The system works alongside the device's 50Hz refresh rate to provide smooth thermal observation.

The Lynx LE10 3.0 features a 0.39-inch AMOLED display with a resolution of 1024 × 768 pixels.

The display presents the processed thermal image, digital magnification and device menus through the monocular's eyepiece.

Users can choose between six thermal colour palettes:

• White Hot
• Black Hot
• Red Hot
• Red Monochrome
• Green Monochrome
• Fusion

Different palettes can help improve perceived contrast or provide a more comfortable viewing experience depending on the environment and personal preference.

The monocular also provides display brightness, contrast and tone adjustments, together with dioptre adjustment to suit the user's eyesight.

The LE10 3.0 includes several additional viewing functions designed to improve convenience during observation.

Picture-in-Picture displays a magnified portion of the thermal image while retaining the wider scene, helping users examine an area without completely losing their surrounding view.

Hot Track assists with identifying warmer areas within the thermal scene.

The monocular also supports an estimated distance measurement function. This is not the same as a built-in laser rangefinder and should not be treated as a precision distance measurement.

Standby mode allows the device to remain ready for use without requiring a full shutdown between observation periods.

The HIKMICRO Lynx LE10 3.0 operates using a replaceable rechargeable 18650 lithium-ion battery.

The standard manufacturer package includes two rechargeable 18650 batteries and a compatible battery charger.

This allows one battery to be used in the monocular while the second is kept as a spare for longer observation sessions.

• Battery type: Replaceable rechargeable 18650 Li-ion
• Rechargeable batteries included: 2
• Battery charger included: Yes
• Operating time at 25°C: Up to 6 hours per battery
• Operating time at -20°C: Up to 5.5 hours per battery
• Manufacturer runtime test condition: Wi-Fi hotspot enabled
• USB Type-C power input: 5V DC / 2A
• Direct charging: Supported
• Compatible external power supply: Supported

Based on the manufacturer's stated operating times, the two supplied batteries provide the potential for approximately 12 hours of combined use at 25°C, with battery changes between sessions.

Actual runtime depends on ambient temperature, battery condition, recording activity, wireless connectivity and other device settings.

Only use compatible rechargeable batteries and follow the manufacturer's charging and battery safety instructions.

The LE10 3.0 incorporates 64GB of built-in eMMC storage for saving thermal photographs and video recordings.

Audio recording is also supported, allowing sound to be captured alongside compatible video recordings.

The device features 2.4GHz and 5GHz Wi-Fi connectivity for use with compatible smartphones and tablets.

The HIKMICRO Sight app provides supported functions such as live viewing, media access and device management.

• Thermal photo capture
• Thermal video recording
• Audio recording
• 64GB internal storage
• Local media album
• 2.4GHz and 5GHz Wi-Fi
• HIKMICRO Sight app compatibility
• USB Type-C connectivity

Available app functions may vary depending on the device firmware and installed application version.

The Lynx LE10 3.0 is designed as a compact handheld thermal monocular suitable for carrying in a jacket pocket or outdoor equipment bag.

Its dimensions are approximately 152.4 × 53.6 × 49.5mm, with a manufacturer-stated weight of 291.5g including the battery.

The housing carries an IP67 ingress protection rating, providing resistance to dust and temporary water immersion under the conditions specified by the rating.

HIKMICRO specifies an operating temperature range from -30°C to +45°C.

The lightweight construction and simple focus-free lens make the LE10 particularly convenient for frequent handheld scanning and outdoor observation.

The LE10 3.0 and LE15 3.0 share the same 256 × 192 thermal sensor platform, but use different objective lenses.

The LE10 3.0 is better suited to close-range scanning and situations where a wider viewing area is preferred.

The LE15 3.0 offers higher base magnification and a longer manufacturer-stated detection range, making it more suitable for observing heat signatures at greater distances.

The standard HIKMICRO Lynx LE10 3.0 accessory package includes:

• 1 × HIKMICRO Lynx LE10 3.0 thermal monocular
• 2 × rechargeable 18650 lithium-ion batteries
• 1 × compatible battery charger
• 1 × USB Type-C cable
• 1 × lens cleaning cloth
• 1 × quick-start guide
• 1 × user manual / warranty documentation

Two rechargeable batteries and a compatible charger are included in the standard manufacturer package.

The LE10 3.0 does not require an infrared illuminator to operate, and no separate battery purchase is necessary for normal initial use.

The HIKMICRO Lynx LE10 3.0 is covered by the manufacturer's applicable limited warranty terms.

• Main device and components: 3-year standard warranty
• Uncooled thermal detector: 10-year warranty
• Removable rechargeable batteries: 1-year warranty
• Battery charger: 1-year warranty
• Eligible product registration may extend main-device coverage by an additional 180 days

To qualify for the additional 180-day warranty extension, eligible products must be registered to a HIKMICRO account within 30 days of purchase, subject to the manufacturer's conditions.

Warranty coverage is subject to HIKMICRO's applicable terms, proof-of-purchase requirements and exclusions, including accidental damage, misuse and unauthorised modification.

For products purchased from Bamfords Online, contact us first if a fault develops. We can assist with the appropriate supplier or manufacturer warranty process.

Your statutory consumer rights are unaffected.

What is the detection range of the Lynx LE10 3.0?

HIKMICRO specifies a thermal detection range of up to 500 metres under reference test conditions. Recognition and positive identification distances will generally be shorter.

What thermal sensor does the LE10 3.0 use?

The LE10 3.0 uses a 256 × 192 VOx thermal detector with a 12μm pixel pitch and NETD below 20mK.

Is the LE10 3.0 suitable for woodland observation?

Yes. Its wide field of view, 9.7mm objective lens and 1.4× base magnification make it particularly suitable for scanning woodland, hedgerows and smaller fields.

What is the difference between the LE10 3.0 and LE15 3.0?

The LE10 has a wider field of view and lower base magnification, making it better suited to close-range scanning. The LE15 uses a 15mm lens and offers a longer 750m detection range.

Does the LE10 3.0 work in complete darkness?

Yes. Thermal imaging detects infrared radiation emitted by objects and does not require visible light or an external infrared illuminator.

Does the LE10 3.0 have adjustable focus?

The objective lens uses a focus-free design, so manual objective focusing is not required during normal observation. The eyepiece provides dioptre adjustment.

Does the LE10 3.0 come with batteries?

Yes. Two rechargeable 18650 lithium-ion batteries are included in the standard manufacturer package.

Is a battery charger included?

Yes. A compatible battery charger and USB Type-C cable are supplied.

How long does the battery last?

HIKMICRO specifies up to 6 hours per battery at 25°C and approximately 5.5 hours at -20°C with the Wi-Fi hotspot enabled under its test conditions.

Can I use the monocular with an external power bank?

Yes. The LE10 3.0 supports compatible external power through its USB Type-C connection, using the manufacturer's specified 5V DC / 2A input.

Can the LE10 3.0 record video?

Yes. It supports thermal photographs, video recording and audio recording, with 64GB of built-in storage.

Does it connect to a smartphone?

Yes. The monocular supports 2.4GHz and 5GHz Wi-Fi and is compatible with the HIKMICRO Sight app.

Does the LE10 3.0 have a laser rangefinder?

No. The LE10 3.0 does not have an integrated laser rangefinder. It supports an estimated distance measurement function, which is not equivalent to laser ranging.

Is the HIKMICRO Lynx LE10 3.0 waterproof?

The device has an IP67 ingress protection rating, providing protection against dust and temporary water immersion under the conditions specified by the rating.

What warranty is included?

The main device has a 3-year manufacturer's warranty, the uncooled thermal detector has 10-year coverage and removable rechargeable batteries have 1-year coverage, subject to HIKMICRO's applicable warranty terms.