Umarex UX PCP Hand Pump

• Manufacturer: Umarex
• Product: UX PCP Hand Pump
• Manufacturer item number: 2.0046
• Product type: Manual high-pressure PCP hand pump
• Maximum working pressure: 300 bar
• Maximum working pressure: Approximately 4,350 psi
• Compatible systems: Suitable 200-bar and 300-bar PCP reservoirs
• Power source: Manual operation
• Pressure gauge: Integrated analogue gauge
• Gauge units: Bar and PSI
• Handle: Rubberised T-handle
• Base: Folding footplate
• Filling hose length: Approximately 55 cm
• Connections: M10, M10x1, Foster and 1/8" Quickfill
• Filtration: Air-drying particle filter with desiccant
• Dimensions: Approximately 635 × 250 × 150 mm
• Weight: Approximately 2.08 kg
• Finish: Silver, black and gold
• Intended application: Manual filling of compatible PCP airgun reservoirs

Always follow the maximum working pressure specified by the airgun or reservoir manufacturer.

The UX PCP Hand Pump allows users to recharge compatible PCP airgun reservoirs using manual pumping power rather than an electric compressor.

This makes it useful for shooters who want a filling solution that can be used wherever there is a suitable stable surface, without depending on access to mains electricity or a charged battery.

It is particularly convenient for topping up smaller PCP reservoirs between shooting sessions.

Manual high-pressure filling requires physical effort, especially as the reservoir approaches its target pressure. Larger reservoirs and substantial fills from low starting pressures require more pumping time and effort.

For users who regularly fill large reservoirs or want to reduce physical effort, an electric PCP compressor may be a more suitable alternative.

The Umarex UX PCP Hand Pump is suitable for compatible PCP airguns using 200-bar or 300-bar filling systems.

Its maximum working pressure of 300 bar allows it to serve a wide range of modern PCP air rifles and air pistols, provided the correct filling connection is used.

Importantly, the pump's maximum pressure does not mean every airgun should be filled to 300 bar.

For example, if your PCP air rifle has a maximum approved filling pressure of 200 bar, you must stop filling at 200 bar or at the lower pressure specified by the manufacturer.

Before filling, always check the reservoir's pressure rating, condition and connection requirements.

Never attempt to fill damaged, unsuitable or unapproved compressed-air reservoirs.

The UX PCP Hand Pump includes four common filling connection types to accommodate a wide range of PCP airgun systems.

• M10 connection
• M10x1 connection
• Foster connection
• 1/8" Quickfill connection

These fittings make the pump suitable for many PCP airguns using standard high-pressure filling arrangements.

Some air rifles use manufacturer-specific filling probes or other proprietary connections. An additional compatible adapter may be required for those models.

The supplied high-pressure hose measures approximately 55 cm, providing a practical connection between the pump and airgun reservoir.

Always ensure the filling hose and adapters are securely fitted before beginning to pump.

The pump features an integrated analogue pressure gauge displaying readings in both bar and PSI.

This allows users to monitor filling pressure as they pump and stop when the reservoir reaches its recommended charging pressure.

Having both measurement units is particularly useful because different airgun manufacturers may specify filling pressures in bar or PSI.

Always read the gauge carefully and avoid exceeding the maximum approved pressure of the airgun reservoir.

The gauge should be inspected for damage and used in accordance with the manufacturer's operating instructions.

The Umarex UX PCP Hand Pump incorporates an air-drying particle filtration system designed to help reduce moisture and airborne particles during filling.

Desiccant is used within the drying system to help absorb moisture from incoming air.

This is particularly useful because atmospheric air naturally contains moisture, which can become concentrated during high-pressure compression.

The drying media and filtration components require inspection and replacement or servicing in accordance with the manufacturer's instructions.

Air-drying filtration reduces contamination risk but does not guarantee completely moisture-free compressed air.

Use the pump in a clean, dry environment wherever possible and follow the recommended maintenance procedures.

The UX PCP Hand Pump features a folding footplate that provides a stable platform during pumping.

The user stands on the footplate to help hold the pump securely in position while operating the T-shaped handle.

Once finished, the footplate folds away to make transport and storage more convenient.

The rubberised handle provides a secure grip, while the pump's approximately 2.08 kg weight makes it practical to carry between locations.

Its compact design makes it useful for shooters who want a backup filling option or a portable alternative to an electric compressor.

Always read the supplied manufacturer's instructions before using the UX PCP Hand Pump. The following is a general overview and does not replace the official operating procedure.

• Position the pump on a firm, level and dry surface.
• Unfold the footplate and check that the pump is stable.
• Inspect the hose, gauge, seals and fittings for damage.
• Identify the correct filling connection for your PCP airgun.
• Connect the high-pressure filling hose securely to the compatible reservoir.
• Ensure the pressure-release valve is correctly positioned for filling.
• Stand securely on the footplate and operate the pump using smooth, controlled strokes.
• Monitor the integrated pressure gauge throughout filling.
• Stop pumping when the reservoir reaches its manufacturer-approved filling pressure.
• Follow the manufacturer's pressure-release procedure before disconnecting the hose.
• Inspect and store the pump in a clean, dry location after use.

Never disconnect a pressurised filling hose, exceed the reservoir's maximum approved pressure or operate the pump with damaged components.

Regular inspection and maintenance help keep the UX PCP Hand Pump operating safely and effectively.

• Inspect the filling hose and fittings before each use.
• Check seals and O-rings for damage or wear.
• Keep the pump clean and free from dirt and debris.
• Maintain the air-drying filter and desiccant as instructed.
• Follow the manufacturer's lubrication and servicing guidance.
• Store the pump in a dry environment when not in use.
• Replace worn components using suitable manufacturer-approved parts.

Never apply unsuitable lubricants or attempt repairs to high-pressure components without following the manufacturer's approved procedure.

The UX PCP Hand Pump and Umarex PAC electric compressors provide different approaches to filling PCP airguns.

The UX hand pump offers a lower-complexity, manually operated solution that does not require electricity, batteries or a separate air cylinder.

It is particularly useful for occasional filling, smaller reservoirs and shooters who want a portable backup filling method.

Electric compressors are generally better suited to users who want to minimise physical effort or regularly fill larger PCP reservoirs.

The Umarex PAC ECO Silent prioritises quiet electric filling, while the PAC 400 offers rechargeable battery-powered operation. The PAC 900, PAC 1100 and PAC 1400 provide additional electric filling options for different power and performance requirements.

The standard manufacturer package includes:

• 1 × Umarex UX PCP Hand Pump
• Folding footplate
• Integrated pressure gauge
• High-pressure filling hose
• M10 connection adapter
• M10x1 connection adapter
• Foster connection adapter
• 1/8" Quickfill connection adapter
• Air-drying filtration components
• Desiccant for the drying system
• Manufacturer-supplied maintenance components and assembly accessories
• Operating instructions

The pump may require some assembly before first use. A PCP airgun, separate compressed-air cylinder and electric compressor are not included.

The Umarex UX PCP Hand Pump is covered by your statutory consumer rights, including protection against goods that are faulty or not of satisfactory quality.

Any additional manufacturer's commercial warranty is subject to the warranty documentation supplied with the product. A specific additional warranty period has not been independently verified for Umarex model 2.0046.

Damage caused by misuse, exceeding the maximum working pressure, accidental damage, unauthorised modifications or failure to follow the manufacturer's maintenance instructions may not be covered by a commercial warranty.

If you experience a problem with your pump, please contact Bamfords Online with your order details and a description of the issue. We will assist with the appropriate next steps.

Your statutory consumer rights remain unaffected.

What is the maximum pressure of the Umarex UX PCP Hand Pump?

The pump has a maximum working pressure of 300 bar, approximately 4,350 psi.

Can it fill a 200-bar PCP air rifle?

Yes. The pump is suitable for compatible 200-bar PCP airgun reservoirs.

Can it fill a 300-bar PCP air rifle?

Yes, provided the reservoir is specifically rated for filling to 300 bar and the correct compatible connection is used.

Does the pump require electricity?

No. It is operated manually and requires no external electrical power supply.

Does it include a rechargeable battery?

No. The UX PCP Hand Pump does not use batteries.

Does it include a pressure gauge?

Yes. An integrated gauge displays pressure in both bar and PSI.

What filling adapters are included?

The pump includes M10, M10x1, Foster and 1/8" Quickfill connections.

Will it fit every PCP air rifle?

The supplied fittings cover many common PCP filling systems. Some airguns require a manufacturer-specific filling probe or additional adapter.

How long is the filling hose?

The supplied high-pressure hose is approximately 55 cm long.

Does it have an air filter?

Yes. It incorporates an air-drying particle filter.

Does it help remove moisture from the air?

Yes. Its desiccant-based drying system helps reduce moisture entering the filling system, although it does not guarantee completely moisture-free air.

Can the filter be maintained?

Yes. Follow the manufacturer's instructions for inspection, maintenance and replacement of filtration and drying components.

Does the base fold away?

Yes. The footplate folds for more convenient transport and storage.

How much does the pump weigh?

Approximately 2.08 kg.

How tall is the pump?

Its published dimensions are approximately 635 × 250 × 150 mm.

Is a PCP hand pump difficult to use?

Manual pumping requires physical effort, particularly at higher pressures. Smaller top-up fills are generally easier than filling a reservoir from a very low starting pressure.

How many strokes does it take to fill an air rifle?

The number of strokes depends on the reservoir's volume, starting pressure and target pressure. There is no single figure that applies to every PCP airgun.

Can I use it to fill a large diving cylinder?

The UX PCP Hand Pump is intended for compatible PCP airgun reservoirs. It is not a practical alternative to specialist equipment for filling large diving cylinders.

Does the pump need maintenance?

Yes. The hose, seals, filtration components and other serviceable parts should be inspected and maintained according to the manufacturer's instructions.

What warranty does the Umarex UX PCP Hand Pump have?

Your statutory consumer rights apply. Any additional commercial warranty follows the terms supplied with the product; a specific manufacturer warranty duration has not been independently verified for model 2.0046.

Should I choose a hand pump or an electric compressor?

Choose the UX PCP Hand Pump if you want a portable, manually operated filling solution without electricity. An electric compressor may be more convenient if you regularly refill larger reservoirs or want to minimise physical effort.